Organic Fertilizer Pellet

Organic fertilizers pellets are naturally rich in nitrogen, phosphorus, and potassium, the three major nutrients needed to grow strong and healthy plants. The organic pellet class of fertilizers tend to be less refined and involve little or no chemical processing. Also, the natural environment tends to have an easier time breaking down and absorbing natural pellet fertilizers. Organic fertilizers pellet increase the biological activities in the soil. Micro-organism’s within the soil help plants convert nutrients into food and help break down old plant material which adds to the over all health of the soil and garden.

Pellet fertilizer has a slow-release capability. This slow-release property allows pellet fertilizers to gradually release nutrients, which gives plants time to absorb and use them through the growing season. In this way, the pellet fertilizer also helps stop leaching and soil erosion, which are side effects of the liquid form. Pellet fertilizer’s content makes it a great source of nutrients not only for plants, but also for micro-organisms in the soil.

HIAS: the new efficient hydroponic irrigation system

Hydroponics is very well known in modern agriculture for the numerous advantages it provides in intensive farming worldwide; however, up until now it was only used commercially in annual production crops (vegetables, flowers, ornamental plants, nurseries, etc.). Its use with fruit trees has not expanded due to its special characteristics and the problems that its implementation entails.

JORMAR FRUITS S.L. has developed and patented HIAS (Hydroponic Irrigation Adapted System); a new mixed hydroponic system offering the many benefits of this irrigation technique. It allows for its use with already established tree crops in an easy way, with a short adaptation period and no stress for the plantation. The plant keeps all its roots, but only the ones inside the HIAS container develop the hydric and mineral nutrition function.

The irrigation system consists in an especially-designed container with a waterproof plastic material, black in the inside and durable for years (protected against UV rays from the sun), which is placed close to the tree trunk and, by means of drip irrigation, it distributes all the water and nutrients through a fertigation system, making the tree roots go inside it through an already-prepared opening protected from sunlight.

"After several tests with prototypes and observing the performance of the system in crops, it was decided to patent the HIAS system, as there is no information about this irrigation system being used anywhere else in the world," explains Jorge Labrador, designer of the patented prototype. The patent has extended to several countries like Turkey, Morocco, Algeria and South Africa, lands with arid climates and where irrigation is a key element in fruit production. "At the moment we are processing the patent in Israel."

The main goals of this system are to significantly reduce water consumption in fruit tree irrigation and to lower fertiliser and energy costs. "Controlling fertigation we can reduce groundwater pollution from excess of nutrients, especially nitrogen," affirms Jorge. "With this system, the homogeneity and production of the fruit tree plantation would also improve, reducing the need for growth regulators." 

"It is a system for efficient management of the resources used in crops and allows for improvements in production, quality and environmental conditions. Summing up, it is a new productive system model for fruit tree and multi-annual crops," he concludes.

For more information:
Jorge Labrador Agustín
JORMAR FRUITS, S.L.
Tel:+34638260425
+34630962267
jrglabrador@gmail.com
www.jormarfruits.es

Methods of Fertigation

These strawberries are irrigated  and fertilized via Fertigation

Fertigation, as the name implies, is the applying of fertilizers through irrigation water: Fertilization + Irrigation. This relatively new technique is being more and more commonly used in recent years, but the term "fertigation" is still not well recognized and many have not heard it.

Fertigation has many advantages over other fertilization methods, and when properly used, it saves time and labor, fertilizers application is more accurate and uniform, and nutrient uptake by roots is improved.

Two methods of fertigation: quantitative and proportional

When using fertigation, fertilizfers solutions are prepared in advance in stock tanks and the solution is then injected into the irrigation water. The most common fertigation methods to do so are the quantitative method and the proportional method.

The quantitative method is commonly used in soils. In this fertigation method, the grower first decides how much fertilizer he needs to apply per area (e.g. kg/ha, lbs/acre). This quantity of fertilizer is then delivered through the irrigation system.

The proportional method is mostly used in soil-less media and sandy soils. In this method a defined quantity of the stock solution is injected into each unit of water flowing through the irrigation system (e.g. l/m3, lbs/gal).

Some fertigation controllers allow the grower to directly determine the required injection rate, while other controllers require the input of time and flow parameters (irrigation flow rate, irrigation duration, injector discharge, injection duration).

Irrigation system design for fertigation

Effective fertigation requires knowledge and proper management. In fertigation, fertilizing is an integral part of the irrigation system and therefore, the irrigation system has to be properly designed. Here are some examples to be taken into consideration for a good design:

Irrigation flow rate should correlate to the injector discharge. For example, if the irrigation flow rate is too high, it won't be possible to inject the full amount of the needed fertilizer.

Installing one-way valves in appropriate places in the system prevents back flow of fertilizers to the pumps or into drinking-water lines.

Water meters installation is highly important.

The whole system should be well calibrated, including injectors, water meters, EC and pH sensors. Inaccurate readings may result in untoward results, damages to the irrigation system and plants and obviously, the efficiency of fertilization is reduced.

Importance of fertilizers solubility in fertigation

Not all fertilizers can be used in fertigation: only water soluble fertilizers are appropriate, but bear in mind that they differ in their solubility under the same conditions. Moreover, the solubility of each fertilizer may change under different pH and temperatures.

Mixing different fertilizers in the same stock tank may also affect their solubility. More importantly, some fertilizers cannot be mixed together because of interactions that result in insoluble salts which clog the irrigation system and reduce the efficiency of fertigation (see Solubility article).

Irrigation system plugging hazard: causes and solutions

Fertigation is commonly practiced using micro-irrigation systems, which are highly susceptible to plugging. The causes of plugging may be particles in the water, precipitation of salts or bacteria and algae growth.

Particles of sand and suspended debris are usually too large to pass through emitters, while silt-sized and clay-sized particles do not normally cause emitters plugging. This kind of plugging hazard can be predicted by measuring turbidity and performing laboratory filtration test. Plugging with sand particles and debris can be prevented by adequate filtration.

In fertigation, the irrigation water contain a relatively high concentration of dissolved salts. If the pH of the irrigation water is above 7.0, or if one or more minerals are in excess, precipitation and emitter plugging is highly probable. Precipitates of Calcium and iron minerals are the most common. Preventing plugging in this case is by keeping the pH of the irrigation water below 7.0 (slightly acidic) and avoiding excessive application of fertilizers, beyond the crop requirements. Flushing the irrigation system before or after each irrigation cycle can also prevent salt accumulation.

High levels of iron and hydrogen sulfide promote growth of bacteria, which create slime. Algae can also create slime. Slime accumulates in different parts of the irrigation system and may cause emitter plugging. Reddish slime indicates presence of iron bacteria, while yellowish to white slime suggests that sulfur bacteria are active. Preventing plugging by slime can be achieved by chlorination. If the source water is not chlorinated, it is a good practice to inject chlorine upstream to the filtration system.

Annual maintenance of the irrigation system is extremely important for keeping the system in good condition.

Guy Sela is an agronomist and a water specialist. In 2005 Guy developed a unique software for fertilizer management that helps growers reach optimal yields, while saving time, money and frustration.